Hughes 25

Hughes 25
Development
DesignerHoward Hughes
LocationCanada
Year1968
BuilderHughes Boat Works
RoleCruiser
NameHughes 25
Boat
Displacement3,500 lb (1,588 kg)
Draft3.25 ft (0.99 m)
Hull
Typemonohull
Constructionfibreglass
LOA25.17 ft (7.67 m)
LWL19.00 ft (5.79 m)
Beam7.50 ft (2.29 m)
Hull appendages
Keel/board typefin keel
Ballast1,600 lb (726 kg)
Rudderinternally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height31.50 ft (9.60 m)
J foretriangle base8.33 ft (2.54 m)
P mainsail luff27.67 ft (8.43 m)
E mainsail foot10.00 ft (3.05 m)
Sails
Sailplanfractional rigged sloop masthead sloop
Mainsail area138.35 sq ft (12.853 m2)
Jib/genoa area131.20 sq ft (12.189 m2)
Total sail area269.55 sq ft (25.042 m2)
← Nutmeg 24

The Hughes 25 is a Canadian recreational keelboat that was designed by Howard Hughes as a cruiser and first built in 1968.[1][2][3][4]

The Hughes 25 is most likely a development of William Shaw's Nutmeg 24 design.[1][2][5][6]

Production

The Hughes 25 was built by Hughes Boat Works in Canada, starting in 1968 and proved commercially successful. It is now out of production.[1][2][7][8]

Design

Hughes Boat Works acquired the tooling and moulds for the Nutmeg 24 from Tanzer Industries and used it to develop the Hughes 24, although it only sold in small numbers. The Hughes 25 is thought to be derived from the same design, with the addition of a fin keel, spade-type rudder and a reverse transom, but retaining Shaw's basic hull shape.[1][2]

The Hughes 25 is a recreational keelboat, built predominantly of fibreglass, with wood trim. It has a masthead sloop rig, a spooned raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 3,500 lb (1,588 kg) and carries 1,600 lb (726 kg) of ballast.[1][2]

The boat has a draft of 3.25 ft (0.99 m) with the standard keel, allowing ground transportation on a trailer.[1][2]

The design has sleeping accommodation for five people, in one of two cabin interior plans. Layout A has a double "V"-berth in the bow cabin, two straight settees in the main cabin and an aft quarter berth on the starboard side, under the cockpit. The galley is located on the port side abeam the companionway ladder and is equipped with a sink. The head is a potable type, located under the bow "V"-berth. Layout B locates the galley forward, in place of the port settee and adds an extra quarter berth on the port side. A forward hatch provides cabin ventilation.[1][2]

For sailing downwind the design may be equipped with a symmetrical or asymmetrical spinnaker.[9]

The design has a hull speed of 5.84 kn (10.82 km/h).[2]

References

  1. ^ a b c d e f g McArthur, Bruce (2022). "Hughes 25 sailboat". sailboatdata.com. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  2. ^ a b c d e f g h Sea Time Tech, LLC (2022). "Hughes 25". sailboat.guide. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  3. ^ McArthur, Bruce (2022). "Howard Hughes". sailboatdata.com. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  4. ^ Sea Time Tech, LLC (2022). "Howard Hughes". sailboat.guide. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  5. ^ McArthur, Bruce (2022). "William Shaw 1926 - 2006". sailboatdata.com. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  6. ^ Sea Time Tech, LLC (2022). "William Shaw". sailboat.guide. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  7. ^ McArthur, Bruce (2022). "Hughes Boat Works". sailboatdata.com. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  8. ^ Sea Time Tech, LLC (2022). "Hughes Boat Works". sailboat.guide. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  9. ^ Sailrite (25 June 2022). "Hughes 25 Sail Data". sailrite.com. Retrieved 25 June 2022.{{cite web}}: CS1 maint: deprecated archival service (link)