Derbi Senda
Derbi Senda DRD Pro | |
| Manufacturer | Derbi |
|---|---|
| Also called | Senda Xtreme SM/R, Senda DRD, Senda SM |
| Parent company | Piaggio |
| Production | 1995–present |
| Class | SuperMotard |
| Engine | 50–125 cc (3.1–7.6 cu in) liquid cooled, two stroke single cylinder |
| Compression ratio | 11.5:1 |
| Top speed | 50cc: 96 km/h (60 mph), 125cc: 125 km/h (78 mph) |
| Transmission | 6-speed Sequential Manual. Straight Cut Gears |
| Suspension | Ø40 mm hydraulic fork with leading axle; wheel travel 195 mm Rear: hydraulic monoshock; Non-adjustable; wheel travel 180 mm |
| Brakes | Front: 260mm drilled or slotted steel disc (depending on model); single-piston caliper Rear: 180 mm drill or slotted steel disc (depending on model); single-piston caliper |
| Fuel capacity | 50cc: 5.8 litres 125cc: 7.9 litres |
| Related | Gilera SMT/RCR |
The Derbi Senda is a Supermotard made by Spanish company Derbi. It is one of the most popular bikes made by Derbi due to its appeal to young riders, its styling and its amazing tuning possibilities.
History
The bike itself uses an EBS/EBE, D50B0 or D50B1 engine which produces a staggering 5bhp. The Derbi Senda is identically constructed as the Gilera SMT 50. Between 1995 and 2005, Derbi was produced with an EBS / EBE engine, and after 2005, D50B0 / D50B1 engines were used until 2023 when production ended.
Engine
50 cc single cylinder, four-petal plastic reed valve case induction and two-stroke injection (automix) carburetor fueled.
- Engine displacement – 49.76 cc
- Bore/stroke – 39,88×40 mm
- Compression ratio – 11.5:1
- Clutch – Wet, multiple plate
- Starting – Kickstart
- Exhaust
- Rotor Ignition/Generator = 85w/120w
- Cooling system – liquid-cooled
- Fuel tank size = 7.45 litres
- Fuel system – Carburetor Dell'Orto PHVA 17.5 mm
- Main jet = 85
- Needle Jet = A13, notch #2
- Idle jet = 30 Fuel capacity: 7.45 liters
- Transmission
- 1st = 1st 11/34
- 2nd = 2nd 15/30
- 3rd = 3rd 18/27
- 4th = 4th 20/24
- 5th = 5th 22/23
- 6th = 6th 23/22
- Primary drive = 21/78
- Sprockets
- Front = 14 Teeth
- Rear = 52 Teeth
- Overall Final Drive ratio = 14/52
- Spark plug = NGK BR9ES/BR9EG/BR9EIX/BR8ES
- Gap = .6-7 mm
- Wheelbase = 55.354 in (1,406 mm)
- Length = 79.68 in (2,024 mm)
- Width = 80.511 in (2,045 mm)
- Height = 32.677 in (830 mm)
- Tires = Front: 100/80 - 17 inch; Rear: 130/70 - 17-inch
Restriction
Restriction varies depending on the country and dealer, person, or company the bike is purchased from. The engine is usually restricted in the following ways:
CDI unit restricted to 9,400 RPM
- Carburetor
- 'Strangle' baffle/plate in Air filter manifold
- [74 Main jet
- Exhaust
- Exhaust fume/pressure outlet pipes
- Sprockets
- Front; reduced to 11/53 12/53 or 14/54
References
External links